airport extreme setup windows asking for password

Press and hold the reset button for 1 second, then release the button.

Make sure that the base station is connected to power.

When instructed to do so, press this button with a pen or straightened paperclip. Locate the reset button on the base station, next to the ports. You may then use the device in its default state or reconfigure it using AirPort Utility.īefore resetting your base station, it's best to make sure that its firmware is up to date, if possible.

The base station won't be visible in the Wi-Fi status menu or AirPort Utility for up to a minute.

The base station network name is set to 'Apple Network,' followed by the last six digits of the base station's MAC address.

The base station name is set to 'base station,' followed by the last six digits of the base station's MAC (Media Access Control) address.

The base station password is set to 'public.'.

The base station is set to request an IP address by DHCP.

When performing a hard reset or factory-default reset: (This does not erase data stored on the built-in hard drive of a Time Capsule, or on any external hard drive connected to the base station.) Perform this reset if you're selling or giving away your base station.

Factory-default reset: Like a hard reset, but removes any saved configurations and profiles.

Perform this reset when the base station is unresponsive, or you're troubleshooting network issues that aren't resolved by other means.

Hard reset: Resets the base station to an unconfigured state, but retains the last saved configuration and any profiles, allowing you to restore your base station from previous settings.

Soft reset: Resets the base station password and disables security (Access Control and RADIUS settings) for 5 minutes so that you can join the network to make changes. If you make no changes within 5 minutes, the base station reverts to its former settings. Perform this reset if you can't administer the base station because you forgot its password.

Depending on the base station model, you can perform one or more of these types of resets: Resetting your AirPort base station restores it to a state that allows you to regain control of it when you lost the base station password or the base station isn't responding as expected.

Airport extreme setup windows asking for password